Archive

Category Archives for "Longboard Enthusiastic"

How To Choose The Drop Through Longboard?

How to choose the Drop throught longboards in case you want the benefits that come with such a board?

The Drop Through longboard design is one of the many ways that are used to make longboards suited to the needs of the rider. It is made in such a way in order to reduce the center of gravity of your longboard so that the rides are safer and faster and the rider feels more in control of his board.

What Style of Longboarding is best suited to these longboards?

The Drop Through longboards have some distinct characteristics that enhance their abilities over other types of longboards. They are mainly suited to the following styles of longboard riding:

  • Freestyle riding
  • Free-riding (commuting) and
  • Downhill riding

The Drop Through longboards are suited to these styles of longboard riding because of the low fatigue they cause their rider. This is achieved because the distance between the foot and the ground is reduced and the repetitive foot travel distance is reduced considerably. Their suitability to downhill riding is because of the low center of gravity they possess. This, in turn, allows these boards to be highly stable at high speeds and hence makes them suitable to downhill riding.

How is the deck different from other deck styles?

In a drop through longboard, the deck is cut out at two places where the trucks are to be mounted. The trucks are bolted above the surface of the deck at both the nose and tail. This effectively reduces the height of the deck in proportion to the thickness of the deck. So while other boards are top mounted on the trucks, the Drop Through decks are mounted through with the trucks.

A comparable style of the longboards is Drop Down longboards. Their decks are mounted on top of the trucks but the deck drops low at the places where the feet rest while riding. These allow them to achieve a similar effect without the trucks’ baseplates being mounted through the deck.

What type of wheels should you choose?

For bombing hills and achieve insane speeds, you should with some harder wheels rated high on the durometer. This enables the wheels to achieve and maintain high speeds.

For those who ride the drop through longboard on the street to commuting from one place to another, the choice should obviously be larger and softer wheels. This provides the necessary grip while also helps absorb bumps in the pavement.

What should be the choice of trucks?

The choice of trucks is similar to any other longboards. The reverse kingpin configuration is suitable for longboard rides of all types. Further, since the aim is to reduce the height, a shorter overall height of the trucks should be preferred. The axle should extend out in accordance with the needs of the board, decided by the deck width.

How to choose the best bearings for your drop through longboard?

The ceramic bearings can do wonders for any longboard rider in any style whatsoever. The level of ease, assurance, and longevity they provide is unmatched. However, it is not possible for everyone to get a ceramic bearing for the longboards.

So a good set of after-market bearings is the best thing you could choose for your longboard. The ABEC ratings are not as important performance dictators to bearings as durometer ratings are for wheels. So go with a bearing brand that has been tried, tested and proven.

Some video we found on the internet should give you more information:

Conclusion:

In order to choose the best drop through longboard for yourself, first decide what it is you specifically want to do on top of it. Depending on your use, decide about the bearings, the wheels and other elements of the longboard.

People who want to bomb hills need great bearings and hard wheels to reduce speed wobbles. Commuting people need large, soft wheels aided with the help of decent ceramic bearings.

People who are just freestyling and freeriding can just buy a complete drop through longboard with good reviews from its users. There are a plethora of great longboards available with plenty of reviews to decide you easily.

If you want to find more information about the longboard, we have the new at best longboard brands.

How To Choose Longboard For Cruising

So you have got your first longboard and wish to do some cruising on it. Simple enough! It is if you are willing to follow our longboard guide for cruising. The first thing to do is to choose a suitable longboard because every board is more or less specific to a certain style of longboarding. While some are made for cruising, others are built to bomb hills. It is all in the type of deck and other configuration. So let’s dive into deciding how to be a great cruiser on longboards.

How To Choose Longboard For Cruising

How To Choose Longboard For Cruising

Deck Type

The type of deck goes a long way in deciding how a board behaves on the surface you are going to use it on.

  • Choose a deck that your feet fully fit on. Since cruising is what you do when you are a beginners longboard, you do not want to lose your footing. Do you?
  • The deck should be strong to withstand the occasional bump you are going to give it every now and then.
  • The deck should have flex for when you want to be a bit stylish and tricky.
  • Camber and curve are some other aspects to keep in mind. For simple cruising, you should keep it simple,

Trucks

  • The trucks are another important part of determining your cruise quality. If they are too tight, it would be a hell lot more difficult to turn on a dime as you’d want to do.
  • The trucks should have almost the same width as the deck through the axle attached so as to give the most stable platform to your feet.
  • The position where trucks are attached to the deck will decide the wheelbase of your longboard. It is important to have a long wheelbase for beginners to have a stable and reliable ride.

Wheels

  • The wheels decide how much grip you get. The softer the wheels, the more grip they yield. Keep in mind they burn just as fast,
  • The size of the wheels is also very important as they decide how bumpy or not your longboard ride is going to be. If you live somewhere with a lot of rough patches on the road, choose a large wheel and you will be happier for it.
  • The shape of wheels’ lip is important. For the purpose of cruising, you would ideally want square lips to get maximum grip and traction.

Grip Tape

  • Grip Tape is applied on the deck and can be of many types. It mostly serves the purpose of keeping your feet glued to the deck.
  • For showing off, you can choose to have spray on grip to give your grip tape a personalized touch.

Bearings

  • If you are just a beginner who is going longboarding for the first time, the stock bearings are good enough on most boards.
  • If you want to cruise at insane speeds, you should get something proper for the occasion. Reds are some of the best bearings available to put in your longboard.

Extras:

  • If you are picking up an old longboard from the garage, make sure you give it a proper maintenance service. You can do this at home by following our guide.
  • Don’t just go someplace and start cruising. Walk up and survey the path for anything that can cause you to fall and break something.
  • Wear proper safety gear and keep your speed in check. Never choose steep slopes for cruising unless you are an expert.
  • Falling on your face is part of the fun. That is how you become better at longboarding.
  • The best place to begin your longboard journey should be a safe skatepark.

How To Choose The Right Type Of Longboard Of Perfect Shape And Style

God, choosing a longboard is quite a confusing task. You have a variety of styles, shapes and sizes to choose from. Being a beginner, you may feel awe-inspiring to pick a board from a pool of boards but actually it is not. With this article, I would like to enlighten you guys about the riding styles and most common shapes of boards. Once you get hold of these elements, it would be easy for you to choose the type of board you need.

How To Choose The Right Type Of Longboard Of Perfect Shape And Style

How To Choose The Right Type Of Longboard Of Perfect Shape And Style

Obviously, the better you get an idea about the shapes and styles, the easiest it will be to choose the best longboards. Take a sneak-peak on the factors to be considered:

Longboard Riding Style

This one is the most common question which you need to ask yourself in order to choose the perfect board.

Cruising and Carving for Tyros

An all-purpose way of riding is cruising and carving. The board used for this purpose is designed to make you take wider turns while riding whilst you are hitting concrete surfaces.


Free Ride for Intermediate Riders

Quick sliding with technical tricks is all about free riding. In this, the rider manoeuvres the board while downhill riding. Various tricks are used one after another to control the longboard effectually.

Freestyle for All Levels

It is the regular type of riding. You can do anything like dancing, sliding, goofy riding and anything you think of doing. This style is inherited from skateboarding and slots in various technical tricks. Anyone whether a neophyte or an expert can try this style. Enjoy it, it’s a fun guys!!

Downhill for Advanced Riders

Guys, it’s all about speed, speed and speed. That’s all…

Just ride down the hills at as greater speeds as you can. Maintain full balance over the board while bombing the hills and terrains. You being a beginner should pick up slow speed at first and then move onto higher unless you don’t have tried your hands on boarding tricks.

Now, when you are aware of longboarding styles, let’s get our hands rolling with various longboard shapes.

Longboard Shapes

Depending upon the style you choose, it’s the time to focus on shapes now. All the styles get covered up in two shapes of boards i.e. Directional and Symmetrical. Both these shapes go perfect for every rider whether beginner, intermediate or expert.

Directional: Clear from its name, this board goes into one direction only and the most used directional board is pintail.

Symmetrical: Such boards are perfect for free riding and freestyle riding. These are also called bidirectional boards wherein the front and back of the board looks the same. You can stand in any direction while riding to hit the roads smartly.

Conclusion

Lastly, I would like to say that the choice is yours. Choose from any style which suits you well and the shape you feel is perfect for your body. So grab a nice board to have a wonderful riding experience. Happy riding!!

How To Choose A Best Longboard Depending Your Body Shape

Longboards have made a heroic entry in the realm of boarding industry. Every rider whether novice or expert is showing pretty good interest in longboarding. But you may feel that choosing a longboard is quite a cumbrous task which strains a lot of time of yours.

With this article, I would like to make it tranquil for you to make your choice. According to me, one of the best ways to cherry-pick an ideal longboard is by keeping your body shape in check. Your height and weight do the best deal in selecting the best board for you. So take a step ahead in choosing the finest board.

How To Choose A Best Longboard Depending Your Body Shape

How To Choose A Best Longboard Depending Your Body Shape

Board provides phenomenal riding experience if you choose the right flex and length. Potential level and intensity of the board multiplies boundlessly with just right type of deck. While roving, you yourself will feel that how you’re riding experience gets aptly la-di-da with right kind of board crafted specially for your body type. Let’s translate points for your better know-how about flex, potential and response.

It’s true that nice graphic boards attract you but head up and focus on some more things to choose an ideal board.

  • The very first thing to be considered is length and flex of the board. Getting hold of both these elements will cut back your time and you will come to a final decision soon. Then focus on the type of decks crafted for your body type. Once when you are done with these factors, go ahead to crisscross the accessible brands which are satisfying your desires. I know you are feeling that it’s too much on your part. You just want to go, look for a beautiful board and buy it. It is so easy, isn’t it? Yes!! You can do like this but you will not get a perfect board for your body shape and you know what? This way you will get a wrong board and a lot of errors along with. So I care for you guys and just want to make you have the best board ever.
  • Now, it’s the time to read out the reviews of the board you think is best. See what others have to say about that particular board, what is its performance level, how it gets beat up fast etc. Some more factors like life of grip tape and tail of the board also subsidize in ornamenting the board’s enactment.
  • Here we go!! Make your first purchase and go on riding with your friends. The day has arrived when you have chosen the best board for your body shape.

Pay for the board you feel is truly a blissful item in terms of graphics, shape and deck, of course. Don’t have a shop nearby? Not to worry… Online shopping is one such beauty to make your purchases easy on the go.

VOILA!! Consider these tips and choose an incredible board to have a magnificent riding experience.

How To Do Easy Techniques Of Longboarding

Longboarding, a sport where fitness and intensity goes hand in hand. It gained popularity in late 1950s and was crafted to satirize surfing on concrete surfaces. Longboards are like skateboards but are archetypally wider and longer.

How To Do Easy Techniques Of Longboarding

Every best longboards has diverse dimensions reliant upon your body shape and style. Usually, a board is 100 cms long. Quite comfortable and stable to ride, longboards pick up greater speeds easily. Due to the added weight, it becomes a bit impractical to use skateboard tricks for longboarding. So I have jotted down some longboarding tricks, in particular. Here is the goldmine of techniques:

Foot Braking:

One foot is located on the road and other foot is used to maintain balance in foot braking. The same technique works well if you want to place your foot on the sidewalk. Often, boarders use foot braking to stop the board or slow it down while riding.

Drifting:

Most commonly used in downhill racing, it is a technique to decrease the speed of board around a turn. It is actually cumbrous to slow down the speed mid-turn because boards lose grip. Have fun while riding and use this technique to control the speed which is otherwise too constricted to make while racing.

Carving:

While roving at higher speeds, the technique of carving works great. Usually, in downhill boarding, the boarder ploys his board in S shaped curves to dawdle down. A series of curves is followed, sloping left then right and slowly taking control of the speed as you head towards downhill.

Air Braking:

A technique where boarders stand upright on the boards while keeping their arms stretched out. This way the boarder gets complete control over wind confrontation and the board’ speed tumbles down bit by bit. Although it’s a perfect method to slow down the speed, it cannot be used as a braking method. Since air braking is an idyllic approach for higher speeds, it is often used by the boarders.

Slide Braking:

This one is my favourite. I love downhill riding and use slide braking to stop the board. Let me explain how this technique works. You need to quickly turn the board to stop it, make sure to turn it sideways to control the sliding and the board will automatically come to a halt. Practice makes a man perfect so try slide braking from either the front or the back. For added stability, you can even stop the board by locating your hands on the ground. I would suggest wearing riding gloves or else you will get your hands badly bruised up.

Board walking:

As the name suggests, the rider moves his feet up and down the board deck. To your surprise, this technique basically comes in use for longer boards. Depending upon your boarding level, you can try twisting, turning and jumping on the board to add zest and zing in your voyage.

So guys hook it up and try these easy-to-do techniques of longboarding. Stay tuned for more tips and tricks of boarding. Have a good day!!

How To Maintain A Longboard In Great Shape

Longboarding can be a fun hobby. People do it for different reasons, but it all requires having a longboard. For most riders, the longboard becomes a piece of them. No matter if you ride just as a way around town, or if it is a way for you to have fun, you form memories with the board and get to know how it handles. Also, you can customize your board so it will ride the way you want it too. Since the board is an extension of you, it is good to take care of it and keep it in top shape. Not only will maintaining your longboard save you money, but it will also allow you to form a deeper connection with it and know how it works. After reading this you will know what you need and how to maintain your longboard.

How To Maintain A Longboard In Great Shape

How To Maintain A Longboard In Great Shape

 

Why and When to do Maintenance

The main reason to do work on your longboard is to help it last longer and properly. If a board gets to wore out, then it can’t be repaired and you will have to buy a new board. Also, if maintenance is neglected, then riding the board can become a safety hazard.

When exactly do you need to do upkeep on your longboard though? Well, the simple answer is whenever it starts to feel like it isn’t riding right. A longboard is similar to a car as in that you can feel when something is going wrong because you are on it almost every day. Since you are on it frequently, you know how it normally feels and can tell if it starts feeling different. Another sign of work needing to be done on your board is if it starts making odd sounds. The sounds can be rattling or clanking sounds. If this happens, it is a good idea to take your board apart and do some work on it.

Tools you Need

The tools you need to work on your longboard is a pretty small list. Obviously, you need your board to work on, but you will also need a skateboard tool. If you do a lot of riding, then you probably already have this. If not, then you can pick one up fairly cheap at online or at your local skate shop. These are the only tool type things you need.

The cleaning supplies you will need are cleaning spirits, mineral detergent (soap), and lubricating oil. You might also want a few containers to put the parts into, to make cleaning them easier. Also, you will need a cloth or two, and some brushes. If you want to clean your bearings really well, then you can get a bearing cleaning kit.

A few last things that will help, but aren’t required are a blow dryer to dry parts faster, a sewing needle or pointed object to take the caps off the bearings, and some deck glue or new grip tape if yours is coming off the board.

How to Clean your Board

Now we will move on to the actual cleaning process. The hardest part of cleaning a longboard for beginners is the disassemble, but after you have done it a few times it isn’t hard. You can start by removing the kingpin from the board. To do this you use the large grove on the skate tool. Once you have that off you can remove the wheels. All you do is unscrew the bearings and then turn the wheels. Removing the wheels is pretty simple. Lastly, take the baseplates off of the board.

Next, you want to separate the rubber pieces from the metal pieces. To remove the bearing capes you can use the sewing needle or skate tool to get them off. Once you have the pieces separated you can put the rubber pieces into one of the containers and the metal into the other. Since the trucks and metal pieces are bigger you may need a bigger container or to do them in batches. Add some warm but not hot water to the container with the parts. Then in the metal container put the cleaning spirits. Stir it up and let it sit for thirty seconds to a minute. For the thicker gunk, you may need to use the brush to get it off. Once the parts have soaked for a little bit you can take them out and use the towel to wipe off any more gunk. After that, if you want to give them another rinse in the cleaner you can before letting them dry.

For the rubber parts, you want to put the soap or mineral detergent into the water. You mix it the same way and let it soak the same way as the metal parts. Once it has soaked and you got the gunk off the parts with the towel or brush it is time to let them dry. Doing these parts first means they can have time to air dry if you don’t have a blow dryer. For the bearings, if you got a cleaning kit, now would be the time to follow its directions and use it.

While cleaning the small parts of the board is important, you also don’t want to forget to clean the board itself. You want to wipe the bottom of the board with a damp towel to get some of the gunk off of it. Be sure to wipe the area where the trucks connect extra well. To clean the top of the board where the gripe tape is you will need a brush. Use the brush and some soapy water and rub in circular motions over the whole board. After going over it with soapy water, rinse it off and dry it off. If the grip tape is coming off, glue it back down before this step. If the grip tape is old, then you might just want to replace it instead of cleaning it. To do this you remove the old and follow the instructions to apply the new.

Before reassembly, it is time to lubricate the bearings. Use the bearing lubricant on them, and make sure they get completely covered. Once that is done you put the board back together the same way as you took it apart, only in the opposite order. Put the trucks on first and then add the wheels and the kingpin. When putting the wheels back on be sure to rotate them. This way they will get even wear when you ride.

Conclusion

Now that you are at the end you should be able to clean your longboard. As you can see it really isn’t that hard. It only takes a handful of supplies and most of which you probably already have. Also, it only takes a few hours of your time, and the more you do it the faster you will get at it. This is because you will know your board better and the steps involved. Plus, by cleaning your longboard you are building a connection with it. You can customize the bearings or tightness of things, so the board will ride how you like it. On top of all this by practicing good longboard maintenance your board will last a long time. Just be able to store it properly when not in use to keep it in even better shape.

Yocaher Longboards Review

Yocaher is a name that pops up every time you are talking about the best Longboard brands

The Chino, the California-based company, was started way back in 1975. It would not be wrong to say that they have been an integral part of the evolution of longboards.

Yocaher Longboards Review

Yocaher Longboards Review

As such, Yocaher Longboards Brands has a long history of making good quality products because they wouldn’t have survived for so long. Their longboards are best known for being cost effective yet practical. The products are invariably of a high quality despite the reasonable price. It is for this reason that you should definitely give them a look when buying your first longboard.

Our Pick: Top Best Yocaher Longboard 2016

1. Punked Lowrider Drop down through Longboard Complete skateboard

​Reason to buy the Yocaher Punked Lowrider Longboard

Reliable:
  • With a brand as old as Yocaher, you can’t go much wrong. They have been around for decades and there’s a reason for that.
Overall Quality:
  • For the price that you pay, it is a totally bang for the buck product. There are not many parts of the board that you can complain about.

Qualities​

  • The dimensions of the longboard are5 inches wide and 40.75 inches long. This makes it one of the shorter longboards around.
  • The 70mm wheels are on the smaller side, hence may be a hindrance for high speeds.
  • The bearing is ABEC 7 rated and hence should be good enough, but that is not the only parameter to judge bearing performance in a longboard. Ceramic is a dream, though, as these are chrome bearings.
  • The trucks are HD7 and are made of aluminum Hence, you can be assured of their reliability.
  • In addition to all these features, the deck comes fitted with Black Widow Black grip tape.
  • The board comes pre-configured with 8mm plastic risers that ensure no wheel bit erodes your deck.
  • The board rides very smooth and is stable up to moderate speeds.
  • Turning the board may be a hard task thanks to the inexpensive components like bushings and bearings.

​FAQ

1. Who is this board suited for?
2. What is the best part of this board?
3. What is the shortcoming of this board?

2. ​Yocaher New Complete Longboard Kicktail

​Reasons to buy the Yocaher New Complete Longboard Kicktail

YOCAHER New Complete Longboard KICKTAIL 70's shape skateboard w/ 71mm wheels

YOCAHER New Complete Longboard KICKTAIL 70's shape skateboard w/ 71mm wheels

Ride Quality: 
  • The ride quality remains uniformly comfortable no matter where you ride it. However, there might be some wobbles and bumps at extremely high speeds.
The quality of components:
  • Though some parts can do with minor improvements. At this price, however, what more can you ask for.

​Qualities

  • It is inspired by the retro 70s design when Longboards had only just arrived on the scene.
  • The dimensions of the board are 9.75 inch in width and 40 inches in length from the nose to the tail.
  • Like most Yocaher longboard, this also comes with premium 80A grip tape for rider comfort.
  • The bearings are the weak spot as usual and are rated ABEC 5.
  • The deck is made up of 7 ply maple wood. The lack of bamboo means any flex is unavailable.
  • The deck, however, makes up for some of its shortcomings with a concave through the deck.
  • The wheels are an odd 71mm in diameter and are rated 78A on the durometer, thus have a decent grip on offer.
  • Risers have also been provided to reduce any wheel bite on the deck.
  • This Yocaher New Complete Longboard Kicktail can be used to cruise, carve as well as bomb some moderate hills.
  • Even the small potholes, bumps, and even smaller curbs are negotiable thanks to the soft wheels, hangers and risers all working in tandem.

​FAQ

1. Who is this board suited for? Who is this board aimed at?
Can experts use it too?
What are the shortcomings?

3. Yocaher Drop through complete longboard professional speed skateboard

Reasons to buy the Yocaher Drop through Complete Professional Speed Longboard

Great Graphics/Art: 
  • The artwork on its deck is great given the price that you pay for it.
Ease of riding:
  • Any novice to longboarding can find their feet with this longboard beneath them. Give it a try!

Qualities

  • The dimensions of the board are 10 inch in width and 40 inches in length. This makes it a sure-footed longboard for the rider.
  • The deck is made of a 9 ply maple formation. Hence, the strength is good but expecting any flex would be outlandish.
  • The trucks are a HD7 heavy-duty: the standard aluminum alloys that are stable yet not very high performance.
  • The wheels are 70mm in diameter and are rated the routine 78A on durometer. Hence, they give nice amount of grip.
  • Out of the box, the trucks are screwed tight and are difficult to turn. All you need is a longboard tool to right that wrong.
  • The graphics on the deck in itself makes this board worth buying.
  • This board may not be suitable to professional tricksters because the trucks and deck are not suited for that purpose.
  • It is a good cruiser and can carve nicely too. But you’d be wrong to expect too much out of it.

​FAQ

1. What is the target demographic of this longboard?
2. What is the USP of this board?
3. What are its failings?

Finally, with the list of Yocaher longboards above, we hope that it is useful for you. 

What Are The Different Types Of Longboards?

For an average person who is just getting to grips with longboarding and perhaps thinking about starting longboarding himself, it can a tiresome job to decide how to buy a longboard.

What Are The Different Types Of Longboards?

What Are The Different Types Of Longboards?

However, if you break down your requirements into simple parts, the choice becomes easier to make. Let’s see what the different types of longboards are and what they are suited for:

Type Of Longboard Based On Shape

There are several types of shape for the deck of a longboard. The shape determines the usefulness of the best longboards for a particular purpose like cruising, carving, bombing hills, etc. The following are the main types of decks:

Pintail: These boards are a throwback to the inspiration behind longboards: surfboards. They resemble surfboards not only in their looks but also in the ride feel. The center is usually broader than either the nose or the tail. They are best suited to carving. Most easily recognizable longboards due to their namesake shape.

Twins: These boards have gentle curves on the nose and tail. They have usually wide decks which remains the same in width throughout.  They are your go to longboards if you add riser pads and want to carve. They are also well suited for cruising because of their simple shape. Commuters prefer these boards for the very same reason. They are a Top Mount longboard in a way.

Type of longboard – Style Of Deck

Double Drop: Yes, hill bombers love these boards for their stability. They are the hybrids of drop through and drop deck longboards. The lowest of them all, they scream speed and have an extremely low center of gravity. Yes, they are great! Only thing stopping you from buying them is the astronomical price in comparison to other such boards.

Drop Through: This is the board where the baseplate of the truck is attached in a “through” configuration. Instead of being beneath, it is at level with the top of the deck. This achieves a drop in height and adds to stability. Great for high speeds and control.

Drop Deck: This is the board you get when you don’t get your preferred Drop Through longboard. They don’t have the trucks going through the deck, instead, the deck drop between the wheelbase to achieve a reduced high and increased stability.

Top Mount: Carve, cruise, dance, freeride. These boards are the jack of all trades. They are set the highest because, you guessed it, the deck sits simply above the trucks. No gimmicks. Less stability, more agility. Lots of fun. In addition to all this, they are the least expensive because of their simple construction.

The shape of the board is not the only way in which one type of longboard differentiates from another but it is the most important aspect for sure. It lends a lot of characteristics to the board and decides what the board is capable of doing and what it can never do.

There are several other shapes in addition to the ones listed above (type of longboard). However, all of these shapes are usually derivations of these primary shapes or a mix up, just like our beloved Double Drop. You would do well to choose any of these shapes, but there is only so many things one board can do for you.

At here, we would like to share you more information about Best Longboard Brands

Practice Balancing On The Longboard With These Easy Steps

Longboarding has always been fascinating as it gives you an option to ride under the sun or clouds at your own wish. But is it that easy to learn the trick of long boarding? Of course, it’s not… You need to master the art of boarding to keep your backsides off the ground.

Practice Balancing On The Longboard With These Easy Steps

Practice Balancing On The Longboard With These Easy Steps

In this article, I would call for some tricks of balancing on the long board. Here goes the step by step approach:

Step 1: Pick Your Longboards

Choose an ideal board from three types of available boards in the market. They are usually 5 feet long by 8 inches wide with wheels mounted on the trucks. Grip tape, a surface of the board offers easy stay of your shoes on the board.

Boarding is of course, a fun but experimenting with it can prove to be ruinous. And you should pick the best longboards for beginner, it’s will find out the good longboard for you.

Step 2: Work on your stance

Long boarding, in all forms, asks you to work on your stance. How you stand on the board do matters a lot. Keeping your body face to the right and left foot forward is “regular” position whereas right foot forward and facing to the left is “goofy” position.

Tip: To check your stance, stand straight and fall forward. Now, whichever foot you use to catch yourself is your dominant stance.

Step 3: Get hold of the board

Get on the board by pushing your body weight from the back foot to front foot. The key to hold the board is to place your front foot near the front bolts and back foot near the back bolts of the board.

  • Place the toes and balls of your feet on the board and hang off the heels the other side.
  • For the back foot, keep the ball of your foot around the centre of the tail. It will equip you to turn on either side of the board by lifting the front of the board.
  • Grab hold of lower two screws with your front foot and let your heel and toes hang off the edge of the board. Keep your back foot in a way which keeps your heel on the board and toes hanging off the board.
  • Keep your back foot on the bottom curve so that the board gets snooped between the back wheels and back foot.
  • Without any pressure, place the front foot on the back of the bottom two screws.

Step 4: Maintain balance

Now stand straight while keeping your weight on the feet. Bend your legs and elbows and keep your arms perpendicular to the ground. Stretch your legs and balance yourself.

Step 5: Practice the posture

Here you need to push off the board with your feet.

  • Let your toes face forward by rotating your front foot 45 degrees.
  • Locate your weight on the board’s front.
  • Now, get off your back foot and place it near to your front foot. But make sure that your toes face forward.
  • Give a slight push to the ground keeping your back heaved up. You can use the ball of your foot.
  • On the back of the board, keep your back foot and rotate the front foot back.

Step 6: Try turning to left and right

Though people having regular stance need to incline and put weight on the balls of feet, goofy stance people put weight on heels for turning right. For left turning, turn-round the technique.

  • Learn to Fall to Avoid Injury: Rather than flapping on your way down, it would be better that you learn the trick of stopping the board.
  • Fall Forwards: Keep your body facing the side. Cover your face with your upper arm and your hand must be on your shoulder.
  • Fall Backwards: Bend down your knees and put your head down. Cover your head down with your arms. Now turn and spin.

So guys, you are all set to slide, race and cruise through the roads. Wear your safety gear and have a blissful journey.

Yocaher Professional Speed Drop Down Stained Complete Longboard

Maneuvering on this one is great, especially when the trucks are a bit loose, but that’s the case with all of them longboards. There is nothing special about this board, but maybe it’s the simplicity that makes this a great first board for a learner.

Yocaher Professional Speed Drop Down Stained Complete Longboard

Yocaher Professional Speed Drop Down Stained Complete Longboard

Check Price

Benefits & Advantages of this Board

Great Grip Tape with defined hardness & durability: 80A rated black grip tape on the durometer. Your feet stay firmly in place, for longer. The grip tape will last a long time and you can even cover it with your own imagination if you don’t like the original pattern.

Inexpensive:  Especially when you consider that there are people who have been using it for at least a couple of years.

Durability: What do 9 layers of maple wood from Canada mean? When you consider that working with 7 could have been fine, you realize it’s made for the longer run. It can take the occasional fall or a couple of accidents.

Turning Radii & Maneuverability: 41-inches long and 9-inches wide. Especially being so low with these dimension makes it a stable, maneuverable and easily turning longboard. But then, you didn’t expect any less, did you? That’s what the best longboards have for bread and butter after all.

Speed: Want to hit 30 miles an hour on your new Yocaher Professional Speed Drop Down Stained Longboard? Sure, go for it. Totally! That’s what the ‘Professional’ in its name wants you to do. If you are sure footed, you can do better.

Looks & Appeal: 22 styles of graphic design mean one thing: there’s one for everyone. Most of them are going to grab eyeballs because invariably, almost all of them are bright shades of abstract art.

Design & Ergonomics: You stand a bit lower than where the trucks meet the deck. The nine inches of width coupled with the curving, low set deck mean a lot of stability is at hand. Ergonomics are good if not great and there really isn’t much to complain about, especially if you are a speed freak. Besides, if this is your first board, you don’t need much else than what Yocaher Professional Speed Drop Down Stained Longboard has on offer.

Check Price

Special Features:

  • Instead of Bamboo or fiber glass, this board is made entirely out of Maplewood. Now that may not be its biggest highlight, but nine layers of Maplewood make for a sturdy and durable deck. It will certainly last for some time without any cracks or breaks unless you are hell bent on breaking it. It can take a wide range of terrain.
  • Style is one metric that this board can score high on. A choice of designs couple with the drop down style make it look sleek and stylish.
  • High Speeds are its forte. Go from Point A to Point B like you do zip zap zoom.
  • The wheels don’t let you feel too many wobbles at the said high speed. They are 70mm X 52mm in dimensions.
  • The dimensions of the board are 41.25” in length, 9” in width and a shade over 4” in height. The length is not insane, but in fact on the sweet spot.
  • The weight is measly 8.77 inches, it’s certainly light for its length. Though fiberglass construction could have taken a bit off that number.
  • Hardness of the wheels is 78A on the Polyurethane durometer. They are a bit on the softer side but that is how you want your longboard to be. With lots of grip at high speeds.
  • The bearings are rated ABEC 7. One of the highest, but they should not be the sole parameters to judge the bearings of a longboard.
Yocaher Professional Speed Drop Down Stained Complete Longboard

Yocaher Professional Speed Drop Down Stained Complete Longboard

How to use:

  • Get Proper safety gear first: Knee pads, Elbow pads and Helmets and wear them.
  • Go to a hill that you want to bomb, or a sparse traffic area and start speeding.
  • Just cruise or if you are a pro, start perfecting your skills.

Maintenance, Warranty & Cleaning:

  • Clean it with a cloth from time to time.
  • If you don’t like the paintings, just cover them with your own imagination.
  • Warranty can be availed directly through the manufacturer. But accidents are not covered in warranty.
  • Bearings need to be regularly lubricated or replaced if you want a better performance.

FAQ:

1.Who is this longboard aimed at: beginners or professionals?

It’s a good compromise between the two. The Yocaher Professional Speed Drop Down Stained Longboard is made to be nice to beginners and exciting to professionals. Though, the pros might find it underperform their expectations in some areas.

2. Is this the best product in its price range?

Pound for Pound, there may be products that are marginally better. But considering the overall ‘specs’ if they can be called as such, this is winner any way you look at it.[/su_spoiler]

3. How durable is the Yocaher Professional Speed Drop Down Stained Complete Longboard?

Given that it uses 9 layer ply Maplewood, ABEC 7 rated bearing 78A rated wheels and similarly rated trunks, it is one of the products that should easily last a long time. But yes, there are minor issues, especially with the performance of the bearings. They can be easily replaced though.

Conclusion:

The Yocaher Professional Speed Drop Down Stained Longboard isn’t a perfect creation. At this point range it would be foolish to expect anything else. But for what you pay, you get a good rounded product that might be a bit rough at the edges. Though a good pick for beginners and cruisers alike. Take it down a hill and it won’t give you anything else but sheer thrill.